Industrial Dehumidification


Portable Units.

+ XRC series

 How it works:

Ambient air is pushed through an air filter by the fan, and then it passes through a cooling coil (evaporator). The air temperature quickly  decreases and the warm humid air condenses on the cool coil into droplets. Water is either collected in a tank with an over-flow protection or transported through a water drainage hose for continuous drainage. The outgoing cold dry air passes through a second step, a heating coil, before reintroduced in the room. The heat coil (condenser) increases the air to reach a temperature slightly higher than the environment.
The refrigerant r407c is chosen for Munters XRC series to protect the environment and ozone layer. 



+ XR series

 How it works:
Ambient air is pushed through an air filter by the fan, and then it passes through a cooling coil (evaporator). The air temperature quickly  decreases and the warm humid air condenses on the cool coil into droplets. Water is either collected in a tank with an over-flow protection or transported through a water drainage hose for continuous drainage. The outgoing cold dry air passes through a second step, a heating coil, before reintroduced in the room. The heat coil (condenser) increases the air to reach a temperature slightly higher than the environment.
The refrigerant r407c is chosen for Munters XR series is R134A to protect the environment and ozone.

 

 
top page